OEM Famous User interface unit Quotes –Silver Electrolytic Copper Expulsion Fuse – HolleyDetail:
Տեխնիկական պայմաններ
Ապրանքի Տիպ |
| EXPULSION FUSE CUT OUT, 27 kV, 150kVBIL, 100 A 8/12kA, 470MM Creepage Հեռավորությունը | EXPULSION FUSE CUT OUT, 38kV, 170kVBIL, 100A, 5/8 kA, 660mm CREEPAGE DISTANCE | EXPULSION FUSE CUTOUT, 27kV, 150kVBIL, 200A, 7.1/10 kA, 432mm CREEPAGE DISTANCE | |
Ոչ | Հատկություններ | Ստորաբաժանում | Արժեք | Արժեք | Արժեք |
1 | Հիմք |
| |||
Մոդել | HV1 - 27/100 - 8 | HV1 - 38/100 - 5 | HV1 - 27/200 - 7.1 | ||
Ստանդարտ | ANSI / IEEE C 37.40 / 41/42 Iec60282 - 2: 2008 | ANSI C-37.40/41/42 and IEC60282-2 | ANSI/IEEE C37.40/41/42 y IEC60282-2:2008 | ||
Գնահատված ընթացիկ | A | 100 | 100 | 200 | |
Գնահատված լարման | kV | 27 | 38 | 27 | |
Minimum Short Circuit Current | |||||
- Սիմետրիկ | kA | 8 | 5 | 7.1 | |
- Ասիմետրիկ | kA | 12 | 8 | 10 | |
Մեկուսացման նվազագույն մակարդակ. | |||||
- Impulse withstand voltage (BIL), phase to ground and between phases. | kV | 150 | 170 | 150 | |
- Withstand voltage at power frequency between phases, dry, 1 min. | kV | 60 | 80 | 60 | |
- Withstand voltage at power frequency between phase and ground, in wet, 10s. | kV | 50 | 70 | 50 | |
Insulating porcelain material of the base with high purity alumina compositions (between 94% to 99%) with the addition of vitrifiers. | Այո | Այո | Այո | ||
Minimum creepage distance (Phase-Earth) | mm | 470 | 660 | 432 | |
Կոնտակտային նյութ | Silver electrolytic copper | Silver electrolytic copper | Silver electrolytic copper | ||
- Minimum thickness of the top contact silver layer (tab) | սուկ | 15 | 15 | 15 | |
- Maximum electrical contact resistance between each terminal and the nearest metal part accessible after contact | Օհմ | 0.000099 | 0.000099 | 0.000099 | |
- Upper contact pressure spring with fastening and alignment mechanism | Stainless steel, grade 304 according to AISI 304, DIN 1.4301 | Stainless steel, grade 304 according to AISI 304, DIN 1.4301 | Stainless steel according to AISI 304, DIN 1.4301 | ||
Տերմինալների նյութ | Անանուխ պղինձ | Անանուխ պղինձ | Անանուխ պղինձ | ||
-Conductor Range (Diameter) | mm | 4.11 - 11.35 | 4.11 - 11.35 | 4.11 - 11.35 | |
-Terminals for use with copper or aluminum conductors | Այո | Այո | Այո | ||
- Տերմինալների տեսակը | Parallel slots, must include bolt, nuts and pressure washers made of stainless steel | Parallel slots, must include bolt, nuts and pressure washers made of stainless steel | Parallel slots, must include bolt, nuts and pressure washers made of stainless steel | ||
Top support channel material | Galvanized structural steel | Galvanized structural steel | Galvanized structural steel | ||
- Galvanized Material Standard | ASTM A575 | ASTM A575 | ASTM A575 | ||
- Gal ինկապատ ստանդարտ | ASTM A153 | ASTM A153 | ASTM A153 | ||
- Minimum average thickness | սուկ | 86 | 86 | 86 | |
Նվազագույն բացման անկյուն | 120 ° | 120 ° | 120 ° | ||
Minimum number of mechanical operations guaranteed | Ոչ | 200 | 200 | 200 | |
Minimum mechanical resistance of the horn for load operation | դան | 200 | 200 | 200 | |
Dimensions (See Figure 1) | |||||
L | mm | 704 | 842 | 704 | |
M | mm | 409 | 431 | 409 | |
N | mm | 476 | 567 | 476 | |
P | mm | 72 | 82 | 72 | |
Q | mm | 131 | 147 | 131 | |
2 | Ապահովիչ կրող խողովակ | ||||
Հատկություններ | |||||
- Ստանդարտ | ANSI / IEEE C 37.40 / 41/42 | ANSI / IEEE C 37.40 / 41/42 | ANSI / IEEE C 37.40 / 41/42 | ||
- Գնահատված լարման | kV | 27 | 38 | 27 | |
- Գնահատված ընթացիկ | A | 100 | 100 | 200 | |
- Minimum symmetrical/asymmetrical short-circuit current | kA | 8/12 | 5/8 | 7.1 / 10 | |
- Internal diameter range | |||||
- նվազագույն | mm | 11.1 | 11.1 | 17.5 | |
- առավելագույն | mm | 18 | 18 | 23 | |
- Length (allowable range) | mm | 375 ± 3 | 466 ± 3 | 375 ± 3 | |
- Metal parts of joining with the base | Գունատուն բրոնզ | Գունատուն բրոնզ | Գունատուն բրոնզ | ||
- Fuse holder tube cover (top contact) | Silver electrolytic copper, with a minimum thickness of 8 um | Silver electrolytic copper, with a minimum thickness of 8 µm | Silver electrolytic copper, with a minimum thickness of 8 µm | ||
- Eye hook for pole operation | Cast Bronze, with minimum mechanical resistance of 200daN | Cast Bronze, with minimum mechanical resistance of 200daN | Cast Bronze, with minimum mechanical resistance of 200daN | ||
- Fuse holder tube material. | Fiberglass with internal coating in moisture-proof vulcanized fiber | Fiberglass with internal coating in moisture-proof vulcanized fiber | Fiberglass with internal coating in moisture-proof vulcanized fiber | ||
- Fuse holder opening and closing mechanism (fuse holder base) | to avoid fuse holder tube un-alignment greater than 15mm | to avoid holder tube un-alignment no more than 15mm | to avoid fuse holder tube un-alignment no more than 15mm | ||
Suitable for chicote fuses with removable head (Arc shortening rod) | Այո | Այո | Այո | ||
3 | Աքսեսուարների ամրագրում | ||||
- Ամրագրման տեսակը | Type B, according to ANSI/IEEE C37.42 | Type B, according to ANSI/IEEE C37.42 | Type B, according to ANSI/IEEE C37.42 | ||
- Նյութական | Ցինկապատ պողպատ | Ցինկապատ պողպատ | Ցինկապատ պողպատ | ||
- Նյութի ստանդարտ | ASTM A575 | ASTM A575 | ASTM A575 | ||
- Gal ինկապատ ստանդարտ | ASTM A153 | ASTM A153 | ASTM A153 | ||
- Minimum average thickness | սուկ | 86 | 86 | 86 |
Ապրանքի մանրամասն նկարներ.

Առնչվող արտադրանքի ուղեցույց.
We thinks what clients think, the urgency of urgency to act from the interests of a client position of theory, allowing for greater quality, lessen processing costs, price ranges are much more reasonable, won the new and outdated shoppers the support and affirmation forOEM Famous User interface unit Quotes –Silver Electrolytic Copper Expulsion Fuse – Holley, The product will supply to all over the world, such as: Albania, Guinea, Doha, We are proud to supply our products and solutions to every costumer all around the world with our flexible, fast efficient services and strictest quality control standard which has always approved and praised by customers.